Mixer Section
Microphone/Line Input: Electronically balanced, discrele input configuration
Frequency Response: 10Hz to 55kHz, +/-3 dBu
Microphone Input Impedance: 3.9 kÎ
Line Input Impedance: 10kÎ
Microphone Input S/N ratio: 94 dBu
Microphone Inputs: Balanced XLR connectors
Line Inputs: Balanced / Unbalanced, 1/4" (6.3 mm) TRS jack connectors
Tape Inputs: Unbalanced RCA jack
Inputs Distortion (THD & N): 0.04% at 0 dBu, 1kHz
Channel EQ High shelving: +/-15 dB @ 12kHz Low shelving +/-15 dB @ 80Hz
Aux Send: 1 with paths for DSP internal section, external DSP section and Monitor Out
DSP Section: 24-bit Hall, Room, Vocal, Plate, Stereo Delay, Reverb + Delay and Reverb + Chorus combinations
Master Section: Master Level knob, 4 LEDs level meter, 7-band graphic output EQ, and DSP Return level
Output Master EQ: 7-band, +/-5 dB @ 63Hz, 160 Hz, 400Hz, 1 kHz, 2.5 kHz, 6.3kHz, 16kHz
Monitor Section: Master Level knob, 4 LEDs level meter, and 1/4" (6.3 mm) Monitor Out jack
Speaker Section
System Type: 2-way coax vented box
Frequency Response: 65Hz - 20 kHz at -10 dB
Spherical Horn Coverage: 70° H x 70° V
Continuous Power: 150 Watts AES Standard
Peak Power: 300 Watts Peak
Protection: Electronic circuit on driver
Speaker Specification: 10" (254 mm) Low Frequency Driver / 2" (50.8 mm) Voice Coil, 1" (25.4 mm) Neodymium High
Input Connectors: 1/4" (6.3 mm) mono (TS) jack on each cabinet
Amplifier Section
Output Power: 350 Watts (EIAJ)
Impedance 4Î
Protections Overload / Short Circuit / Soft Clip Limiter / Thermal Protection Fan Cooling